- Markets
- Oil and gas
- Renewables
- Marine
- Ports and terminals
- Aquaculture
- Bridges
- Civil and construction
- Highway infrastructure
- Rail infrastructure
- Structural monitoring
- Products
- Load cells
- Specialist testing equipment
- Hazardous area products
- High temperature load cells
- Line tension monitors
- Measurement and control
- Instrumentation
- Systems and monitoring
- Offshore monitoring
- Wellsite monitoring solutions
- Vessel monitoring
- Container weighing
- Ports and terminals
- Foundation testing
- Conveyor chain tension monitoring
- Centre of gravity
- Geotechnical monitoring
- Data services
- Bridge structural health monitoring
- Load testing
- Construction monitoring
- NDV monitoring
- Crane monitoring and weighing solutions
- Load pins
- Load links
- Load shackles
- Tension and compression load cells
- Tension load cells
- Train brake force measuring load cells
- Strain rings
- AXILOG II vibration monitoring system
- BGCMAP rate of corrosion tester
- Dynasen shock pressure sensor products
- Foundation integrity testing products
- Foundation load testing products
- PARAS parallel seismic test system
- PLATEMAN plate load tester
- SB2010 large scale shear box
- SCXT3000 cross hole sonic logging system
- Signal Lever Force Indicator (SLFI)
- SPTMAN hammer energy tester
- TDR2-S concrete slab tester
- Measurement and control
- Chain Tension Monitoring System™
- Renewables mooring monitoring
- Renewables structural health monitoring
- Renewables condition monitoring
- Jack-up rig leg monitoring
- Swivel load monitoring
- Integrated marine monitoring system
- Tendon tension monitoring system
- Riser Tension Monitoring System™
- Life extension programmes
- Winch tension
- Container Weight System™
- Reach stacker configuration
- CWS straddle carrier
- RTG / RMG weighing system
- CWS™ sidelifter configuration
- Below ground corrosion assessment
- Bi-directional static load testing
- Cross hole sonic logging
- Dynamic pile testing
- Parallel seismic testing
- Pile integrity testing
- Static load testing
- James Fisher combines its asset monitoring capabilities under the new brand of James Fisher Strainstall
- James Fisher Strainstall signs collaborative agreement with L. Straatman BV
- James Fisher Strainstall appoints Kinetic Cold Technology as its agent for Malaysia
- James Fisher Strainstall named as New Zealand’s first and only type approved integrated weighing system supplier
- Archive

Static line monitors
Our static line tension monitors are highly accurate and compact.
Designed for wire ropes from 7/8" to 2" diameter, they are suitable for measuring loads of up to 50 tonnes. Simple to install and offering flexibility in use, the small size of the device allows it to be carried easily from application to application.
Download James Fisher Strainstall's static line monitor data sheet.
Features and benefits of static line monitors:
- Compact design
- Robust construction
- Easy to transport
Cabled static line monitor typical specifications:
mA output | |
Rated load | As required |
Proof load | 200% of rated load (dependent on rope capacity) |
Rope diameter | 22mm to 50mm |
Operating temperature | -20oC to +60oC |
Storage temperature | -30oC to +80oC |
Environmental protection | IP67 |
Output signal | 4-20mA |
Electrical connection | 2 or 3 wire |
Cable connection | Gland and connector |
Cable length | 5m as standard |
Recommended supply voltage | 24V |
Maximum supply voltage | 30V |
Wireless static line monitor typical specifications:
Wireless output | |
Rated load | As required |
Proof load | 200% of rated load (dependent on rope capacity) |
Rope diameter | 22mm to 50mm |
Operating temperature | -20oC to +60oC |
Storage temperature | -30oC to +80oC |
Environmental protection | IP66 |
Output signal | Wireless |
Data logging | In interface |
Battery type | 3 x D |
Active battery life | Up to 500 hours |
Standby battery life | Up to 1700 hours |
Telemetry frequency | 2.4Ghz ISM |
System range | Up to 350m |
Sampling rate | 10Hz (500Hz max) |
Diagrams:
Side view | End view |
Static line monitor typical dimensions:
Measurement | |
A mm | 12.5 |
B mm | 2.5 |
C mm | 147.5 |
D mm | 147.5 |
E mm | 320 |
F mm | 319 |
G mm | 191 |
H mm | 66 (max) |
I mm | 66 |
J mm | 140 |
K mm | 9 |
Available options:
- Aluminium or stainless steel
- Cabled or wireless
- Hazardous area
Features and benefits of static line monitors:
- Compact design
- Robust construction
- Easy to transport
Cabled static line monitor typical specifications:
mA output | |
Rated load | As required |
Proof load | 200% of rated load (dependent on rope capacity) |
Rope diameter | 22mm to 50mm |
Operating temperature | -20oC to +60oC |
Storage temperature | -30oC to +80oC |
Environmental protection | IP67 |
Output signal | 4-20mA |
Electrical connection | 2 or 3 wire |
Cable connection | Gland and connector |
Cable length | 5m as standard |
Recommended supply voltage | 24V |
Maximum supply voltage | 30V |
Wireless static line monitor typical specifications:
Wireless output | |
Rated load | As required |
Proof load | 200% of rated load (dependent on rope capacity) |
Rope diameter | 22mm to 50mm |
Operating temperature | -20oC to +60oC |
Storage temperature | -30oC to +80oC |
Environmental protection | IP66 |
Output signal | Wireless |
Data logging | In interface |
Battery type | 3 x D |
Active battery life | Up to 500 hours |
Standby battery life | Up to 1700 hours |
Telemetry frequency | 2.4Ghz ISM |
System range | Up to 350m |
Sampling rate | 10Hz (500Hz max) |
Diagrams:
Side view | End view |
Static line monitor typical dimensions:
Measurement | |
A mm | 12.5 |
B mm | 2.5 |
C mm | 147.5 |
D mm | 147.5 |
E mm | 320 |
F mm | 319 |
G mm | 191 |
H mm | 66 (max) |
I mm | 66 |
J mm | 140 |
K mm | 9 |
Available options:
- Aluminium or stainless steel
- Cabled or wireless
- Hazardous area